SimpliSafe Keypad Not Working? 4 Solutions (Solved) (2024)

The SimpliSafe Keypad is one of the most critical components of the security system, but what do you do when it has problems? Well, it’s not uncommon for the SimpliSafe Keypad to have problems; however, there are a few things you can do to solve them should they arise.

Below, we have itemized some of the most common problems users often experience with the SimpliSafe keypad and proven steps you can take to fix them.

Without further delay, let’s get right into it!

SimpliSafe Keypad Not Working? 4 Solutions (Solved) (1)

Table of Contents

  1. What Causes a SimpliSafe Keypad to Not Work?
  2. How to Fix Simplisafe Keypad Not Working?
    • SimpliSafe Connectivity Issues
    • SimpliSafe Keypad Not Working After Update
    • SimpliSafe Not Working- Re-Add to Base Station
    • SimpliSafe Keypad Not Working After Battery Change
  3. FAQ Simplisafe Keypad
    • How do I reset my SimpliSafe Keypad?
    • How do I reconnect my SimpliSafe Keypad to my base station?
    • What is the trouble signal on the SimpliSafe Keypad?
  4. Summary

What Causes a SimpliSafe Keypad to Not Work?

There are several reasons why your SimpliSafe Keypad might be having issues, some a little more complex than others. The potential causes for a SimpliSafe Keypad not working include the following;

  • Interference or Communication Issues

Your Keypad may be experiencing some interference, hindering communication between the Base Station and the Keypad. Also, some communication problems may arise due to obstacles or changes in the environment.

  • Battery Life

The Keypad usually needs new batteries every eight months. If it’s losing connection, it could be time to replace them as expected.

  • Environmental Changes

Being away for an extended period, having an FM radio, or using doors differently could disrupt communication. Environmental changes, like radio signals or infrequent door use, may also affect SimpliSafe system performance.

  • Thresholds for Communication

Consider reviewing how the system decides if a sensor is well-placed to communicate with the Base Station. Suppose the system is having difficulty recognizing when doors are closed. In that case, the system’s sensitivity settings might need adjustment or improvement.

  • Improper Installation

The Keypad may not even turn on if you didn’t set up everything correctly correctly.

  • Power Interruptions

After a power outage, battery-related issues may arise. Consider replacing the batteries with new ones.

  • Software Hiccups

If the base station’s software recently updated, the Keypad might act up. You’ll need to go through the setup process again.

  • Pairing or Connectivity Problems

Suppose the Keypad is not paired or the connection is lost. In that case, you must re-sync it with the base station to restore proper functionality.

Do note that the actual causes may vary, and professional assistance or further evaluation may be required for an accurate diagnosis.

How to Fix Simplisafe Keypad Not Working?

Here are a few problems and quick, easy fixes you can use to get your SimpliSafe Keypad functional again:

SimpliSafe Connectivity Issues

If your SimpliSafe keypad is having connectivity issues, reinstalling it can often resolve the problem. This process refreshes the connection between your phone, the Keypad, and the base station.

Follow the stepsbelow, which guide you through the reinstallation using the mobile application.

1. Download and install the SimpliSafe Mobile App.

If you don’t already have it, download and install the SimpliSafe mobile app on your smartphone.

2. Open and Log In

Open the app and log in with your credentials.

3. Navigate to Menu

Go to the Menu option within the app.

4. Access Device Settings

Choose the option that says“Device Settings”from the menu.

5. Remove Problematic Keypad

Locate the problematic Keypad from the list of devices and remove it.

6. Add Keypad

Tap the plus icon in the top right corner to add a new device.

7. Follow On-Screen Steps

Follow the on-screen instructions to re-add the Keypad to your system.

Pro Tip:SimpliSafe Webapp can also be used for device management.

After completing these steps, check if the issue is resolved. If it persists, proceed to the next solution in the troubleshooting process.

SimpliSafe Keypad Not Working After Update

If you’re facing issues with your SimpliSafe Keypad after an update, follow these simple steps to discharge the device and potentially resolve the issue.

1. Check Battery Status

Dead batteries can interrupt the update process. Ensure you have a fresh pair of batteries ready.

2. Discharging the Keypad

  • Remove the current batteries from the Keypad.
  • Wait for approximately 5 minutes to ensure a complete discharge.
  • Reinsert the old batteries and test the Keypad.
  • If the Keypad turns ON and then OFF, it indicates a successful power cycle.
  • Replace the old batteries with a fresh pair if the Keypad responds correctly.

3. Power Cycle the Keypad

Power cycling involves removing the power source (batteries, in this case) and placing them back in to reset the device. This process helps in resolving various issues, including those related to updates.

4. Sensor Reconfiguration

After performing the power cycle, be prepared to set up your sensors again.

This step is necessary to synchronize the Keypad with the updated system.

Note:If the Keypad refuses to turn on, even with fresh batteries, it might indicate a malfunctioning or dead device.

By following these steps, you can address common keypad issues after an update. If the problem persists, it’s advisable to contact SimpliSafe support for further assistance.

SimpliSafe Not Working- Re-Add to Base Station

If your SimpliSafe keypad is not working, you can add a new one or simply re-add your existing one. If you have multiple keypads in your home or need to re-add a keypad to the base station, follow these simple steps to ensure a smooth connection and resolve any issues.

  • Battery Removal and Reinsertion

Remove the battery from the Keypad and carefully reinsert the battery back into the Keypad to initiate the re-addition process.

  • Initiating Connection

Look for a message on the Keypad that says“Searching for Base Station.”This indicates that the Keypad is ready to connect with the base station.

  • Remove the Base Station Battery Compartment

Using a Phillips-head screwdriver, remove the battery compartment cover of your SimpliSafe base station.

  • Press the Reset Button

On the other side of the power adapter, locate a small circle-shaped button. Press this button to reset and prepare the base station for the keypad connection.

  • Keypad Connection Process

Press any button on the Keypad to initiate the connection process. You should see a message on the keypad display stating,“Connecting to the Base Station.”

At the same time, the base station will confirm that the“Keypad is added.”

  • Verification

After completing the process, check if the keypad issue persists. If the problem is resolved, your Keypad should be successfully added to the base station.

  • Further Troubleshooting

If the problem persists, try more troubleshooting steps as necessary. You may need to move on to additional solutions if required.

By following these steps, you can effectively add a new keypad to your SimpliSafe base station or re-add an existing one without the need for a second keypad.

SimpliSafe Keypad Not Working After Battery Change

If your SimpliSafe Keypad isn’t powering on after a battery change, don’t worry. Here’s a step-by-step guide to help you troubleshoot and resolve the issue.

The Keypad uses four AA batteries, which, depending on usage and placement, have a lifespan of 8-12 months.

The system should alert you when the Keypad has low batteries, giving you time to replace them.

Quick Steps for Powering On

  1. Slide the Keypad up and remove the back panel.
  2. Take out all four batteries.
  3. Wait at least 30 seconds to ensure the Keypad fully powers off.
  4. Insert four new AA batteries, preferably less than eight months old.
  5. Ensure correct battery installation with the negative side touching the springs.

Additional Troubleshooting

If the Keypad still doesn’t light up, try using a known pair of working AA batteries (e.g., from a remote control).

If it powers on with these batteries, replace the Keypad batteries with a new set.

But Suppose the Keypad doesn’t respond with known working batteries. In that case, there may be some hardware problem, and you may need to contact our support team for further assistance.

FAQ Simplisafe Keypad

How do I reset my SimpliSafe Keypad?

To reset a SimpliSafe keypad, unmount it by sliding it up and away from the bracket, remove all batteries, wait for 5 minutes to allow the power to flush out, and then reinsert the batteries.

This process should reboot the Keypad and reconnect it with the Base Station. Suppose the issue you may be experiencing persists. In that case, additional troubleshooting may be needed, and you can contact SimpliSafe Support for further assistance.

How do I reconnect my SimpliSafe Keypad to my base station?

To fix your SimpliSafe Keypad not connecting to the base station, restart it by unplugging it, removing and reinserting a battery (for SS2 or SS3), and then plugging it back in.

Test a sensor or exit test mode using the Keypad. If the problem continues, move the base station closer to the Keypad, ensure a clear path between them, and check for any potential interference. If these steps don’t work, contact SimpliSafe support for help.

What is the trouble signal on the SimpliSafe Keypad?

The trouble signal on the SimpliSafe Keypad, which is indicated by a three-tone warning sound, a flashing yellow light (Trouble Light), and a warning symbol on the Keypad, alerts users to potential issues with the system.

These issues include base station battery failure, unresponsive or offline components, malfunctioning or low-sensitivity detectors (smoke, CO, and Smoke & CO Detectors), tamper switch problems, No Link To Dispatcher errors, and RF interference.

While these warnings cannot be dismissed until the underlying problems are resolved, users can modify or turn off the trouble signal and light in the system settings. It is recommended that they contact SimpliSafe’s support team for further assistance.


Having the SimpliSafe Security System is a great way to improve the security of your home. Still, as with every other system, it isn’t without issues. The SimpliSafe keypad is a wireless device that helps you control the entire system. When that develops problems, your whole system is compromised.

The most common problems associated with the SimpliSafe Keypad have been addressed above. With the steps listed in this article, you should be able to troubleshoot and solve any issues you may encounter with the SimpliSafe keypad. However, if problems persist, ensure you contact customer support for further assistance.

SimpliSafe Keypad Not Working? 4 Solutions (Solved) (2)

About Author

I'm Maroun, the seasoned technology writer crafting compelling tutorials and posts since 2013. With over a decade of versatile experience spanning the IT, Security, and High-tech industries, my main qualities are adaptability and perfectionism. Join me in this journey, where every word is a masterpiece!
Read more about Maroun

Need Help: We hope you were able to solve your problem and find answers to your questions. Not really? Contact us.

SimpliSafe Keypad Not Working? 4 Solutions (Solved) (2024)


How to hard reset SimpliSafe Keypad? ›

Here are the steps, for clarity:
  1. Unmount your Keypad by sliding it up, and away from the bracket.
  2. Remove all of the batteries.
  3. Wait 5 minutes to allow the power to fully flush out.
  4. Reinsert the batteries.
Aug 16, 2020

Why is my SimpliSafe not working? ›

SimpliSafe sensors won't work correctly if the battery is too low, they're still in the box from your order, or the device is too far from the base station. Just like SimpliSafe's sensors, the keypad won't work if it's too far from or isn't paired with the base station.

How do I reconnect my SimpliSafe Keypad? ›

  1. Log in to your account on the web.
  2. In the menu on the left side of the screen select Devices.
  3. Click on the green add or name device button near the top right of the screen.
  4. Once the pop-up loads, you should now be able to pair your Keypad as well as any other devices to your system.
Jun 4, 2020

How do I reset a Keypad? ›

First, locate the reset button on the lock. This button is typically found on the interior side of the door lock. Press and hold the reset button for about 10 seconds until you hear a beep or see the lock's indicator light flash. Release the button after the reset confirmation.

How do I reboot my SimpliSafe? ›

Simply unplug the power cord to your Base Station and, while unplugged, remove a battery (you'll need a screwdriver to get to the battery compartment). Wait a few seconds, and then put the battery back in and plug in the power cord - the Base Station will then come back on.

How do I test my SimpliSafe Keypad? ›

To test the Keypad you can press any button on it such as Off, Home, or Away. If the test was successful the Base Station will say, “Keypad”. You can also test the Panic Button built into the Keypad by pressing and holding the red button at the top of the Keypad for 2 seconds.

How do I put my SimpliSafe system in test mode? ›

Your SimpliSafe® system has a built-in Test Mode to let you test all of your sensors. To enter Test Mode: Press MENU button (enter Master PIN if it asks) Press HOME button until you see "Test Mode" on screen.

Why is my SimpliSafe 1 device not responding? ›

We typically see this happen for one of two reasons: The battery within your Entry Sensor needs to be replaced. The Entry Sensor is too far away from the Base Station and is unable to communicate from its current location effectively.

What is the red button on top of the SimpliSafe Keypad? ›

What is the red button on the SimpliSafe keypad? The red button on top of the SimpliSafe keypad is a panic button. Press and hold it for two seconds to activate it. If you're worried about false alarms, you can disable it on the keypad menu.

How long does SimpliSafe Keypad last? ›

The Keypad takes four (4) AA batteries and they are expected to last 8-12 months, depending on your usage and placement.

How do you turn on the SimpliSafe Keypad? ›

After you adhere the Keypad to the wall just slide it up and off its bracket. Your system has 3 modes: Off, Home, and Away. Pressing Home or Away will arm your system and pressing Off will disarm it. Press down on the edges of the screen to navigate the Keypad menus.

How do I reactivate SimpliSafe? ›

SimpliSafe. Staying true to its name, reactivating SimpliSafe is simple. You can go to its SimpliSafe's reactivation page to make the change or log into the app and tap the Activate Monitoring button. If you're trying to make someone else's system your own, you'll need to call customer service at +1-888-957-4675.

How do I reset an unresponsive keyboard? ›

Reset your wired keyboard
  1. Unplug the keyboard.
  2. With the keyboard unplugged, hold down the ESC key.
  3. While holding down the ESC key, plug the keyboard back into the computer.
  4. Keep holding the ESC key until the keyboard begins to flash.
  5. Unplug the keyboard again, then plug it back in.

What buttons do I press to reset my keyboard? ›

If you're using a wired external keyboard, unplug your device and wait about 30 seconds before plugging it back in again. Hit the ESC key until the keyboard begins to flash. If you're using a wireless keyboard, clearly, you won't be able to unplug it.

Why does my SimpliSafe keypad say out of range? ›

Generally, this issue will happen for one of two reasons: The Keypad is too far away from or cannot communicate with the Base Station. The Keypad is not paired with the Base Station.

How to reset SimpliSafe system for new owner? ›

But in short, the steps are still the same.
  1. Call our Support team to cancel your service. That will free up your Base Station to be used on another account. ...
  2. Remove all Cameras and Smart Locks from your account. You can leave the sensors as they are, and they'll continue to be bound to your system.
Sep 8, 2021

How do I reset my SimpliSafe Safeword? ›

How To Change Your Safe Word
  1. Navigate to the My System gear on the bottom of the screen.
  2. Next, select Location Settings from the menu.
  3. Scroll down to the bottom of the screen and tap the line that says Safeword to change yours.
  4. Be sure to tap Save on the top right side of the screen when you are done.

How do I reset my SimpliSafe after a power outage? ›

How do I reset my alarm after a power cut? If your system is working correctly, it should automatically reset once power is restored. However, if your alarm started beeping during a power cut (usually due to a faulty battery), you may need to disconnect the battery and reconnect it once power is restored.

How to get SimpliSafe recovery code? ›

But another way would be to give our Support team a call at 800-548-9508. After verbally confirming your Safe Word passcode, we can reset the Multi-Factor Authentication on your account, which would also reset the recovery code.


Top Articles
Latest Posts
Article information

Author: Margart Wisoky

Last Updated:

Views: 5629

Rating: 4.8 / 5 (58 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Margart Wisoky

Birthday: 1993-05-13

Address: 2113 Abernathy Knoll, New Tamerafurt, CT 66893-2169

Phone: +25815234346805

Job: Central Developer

Hobby: Machining, Pottery, Rafting, Cosplaying, Jogging, Taekwondo, Scouting

Introduction: My name is Margart Wisoky, I am a gorgeous, shiny, successful, beautiful, adventurous, excited, pleasant person who loves writing and wants to share my knowledge and understanding with you.